-
there are some errors in example for the bmp180 library.
after fixing the example i cannot compile it:
`C:\Users\Lenovo\AppData\Local\Temp\arduino_build_875617/..\arduino_cache_106657\core\core_…
-
Hi All! A lot has happened with this library in the last year since I've been working to maintain with @sandeepmistry so I wanted to kick off a conversation about future releases.
Going over https:…
-
I wanted to hook up my lovely SparkFun BME280 / CCS811 Qwiic board to my SAMD51 Thing Plus (for a solar-powered LoRaWAN environmental sensor :D), but ran into some issues compiling a sketch with this …
kisom updated
4 years ago
-
Hello All,
I'm working with zigbee protocol in order to integrate the AGILE gateway with a custom devices (prototyped over arduino hardware).
We had to make a little setup to the original zigbee p…
-
First of all thanks for sharing this library which I use on an Arduino Leonardo or, te be more specific, on a The Things Uno board which is a Leonardo with integrated LoRaWAN.
Using the (unmodified…
-
Hello,
I am using Arduino Uno and Dragino LoRa Shield 1.4.
I successfully imported this library and opened the sketch ttn-otaa. I made changes to the sketch replacing FILLINs for AppKey, AppEUI and …
-
I just received the latest lilygo tbeam board t22-v1.0 20190612. Seems you merged your sources tree to support this board.
When using plateformio with Code on linux, i get this message :
```
Re…
-
Trying to compile OTAA_DHT11.ino (from examples) with Arduino IDE.
Compilation stopped with the message below.
I have been successful with OTAA_OLED which should use the same principles!
I have not…
-
Hi,
it looks to me like the duty limit is no longer working?!
I have set up da transmition of two byte for every 10 second and about every 10 seconds, the data was sent.
Shouldn't there be a tra…
-
This issue lists the status of all tests for the [Release Candidate 1 of the 2020.07](https://github.com/RIOT-OS/RIOT/releases/tag/2020.07-RC1) release.
Specs tested:
- [ ] [01-ci](https://github.…