-
Trying to run OctoScreen with an Elegoo 3.5" LCD.
octoscreen service does not start. X starts and stops, but OctoScreen does not get started.
Set logs per instructions from #199, but OctoScreen d…
-
Hi there,
I've attempted to open the .stl files within Chitubox and (sadly to say) Microsoft 3D Builder and all appear to be huge in size when opened/imported.
Could you confirm the correct si…
pqpxo updated
2 years ago
-
I drag & dropped the files into the interface & restarted the program. The Elegoo Neptune 2 popped up on the list, but upon clicking the ADD button, the program closes after a short pause. It has done…
-
I've used a different txt and the original files provided by https://github.com/mlee12382/Elegoo-Neptune-Firmware/blob/main/1.%20Auto_leveling-20210903.zip
However after flashing there are no image…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
Upon hitting print, it immediately displays the power outage, printer halted message. I reset the pr…
-
Hello,
I just tried to run this code with an elegoo uno r3 and the altimu v 5 however when I open the serial port all I get is gibberish like this:
Nɗ⸮⸮⸮N!⸮!qPq⸮⸮җ0⸮02⸮:⸮Oe::⸮*⸮.⸮:⸮…
-
## System
- OS: macOS 10.15.7
- Slicer: PrusaSlicer 2.4.1
- Printer: ELEGOO Saturn
- UVtools version: 3.2.1
```
UVtools v3.2.1
Operative system: Darwin 19.6.0 Darwin Kernel Version 19…
-
### Plugin Version
1.26
### Cura Version
4.12.1
### Platform
Windows 10
### Printer
Elegoo Neptune 2
### Reproduction steps
I updated to 1.2.6 from the marketplace and the options is no longe…
-
### Application Version
4.12
### Platform
Mac OS
### Printer
Elegoo Neptune 2
### Reproduction steps
Try to slice file with any print settings.
### Actual results
Fails
### Expected results
…
-
I was trying to print the model shown below
![Annotation 2020-05-02 010740](https://user-images.githubusercontent.com/10389335/80869144-e69d2080-8c9e-11ea-988d-2e45e98326a1.png)
But kept getting…