-
- Field f = this.i2c.getClass().getDeclaredField("fd");
- f.setAccessible(true);
- this.fd = f.getInt(this.i2c);
+ this.fd = I2C.wiringPiI2CSetup(address);
+ if …
-
### Describe the bug
Hello,
I found that raspberry pi 5 use the Synopsys designware i2c adapter, but it seems that this i2c adapter doesn't support SMBus process call, block process call and P…
-
**请求帮助:**
同一个I2C线,分别用ch341+i2c-tool和其他方式抓出来的数据。芯片是CH341T
![P30926-100251.jpg](https://github.com/WCHSoftGroup/ch34x_mphsi_master_linux/assets/48668011/9a88f856-bf3e-48fb-80c6-cdd4601b9be7)
**…
-
Hello! Thank you for such great open source project!
Jetson AGX Orin
agx-csi-adapter Rev 1.0.0 7/2022
sdi-mipi-bridge Rev 1.3.0 02/2021
We have integrated drivers code from sdi-mipi-bridge rep…
-
### Describe the bug
When I used AQM0802-based LCD on Pi 5 with kernel 6.6.20, it often stops responding to the command, and then it shows nothing on LCD.To make the LCD work again, I have to turn of…
-
**Describe the bug**
rpicam and libcamera apps generate fatal errors.
For example:
libcamera-hello: symbol lookup error: /lib/aarch64-linux-gnu/rpicam_app.so.1.5.1: undefined symbol: _ZN9libcamera8…
-
This firmware currently only provides I2C register control, but it would be convenient if it served as a direct drop-in replacement firmware for devices relying on the factory command set. Close this …
-
I'm using Altera Arria10 hps, when I install the driver with debug mode define DEBUG, no massage showing or new device to i2c devices
/sys/bus/i2c/device/0-0020 not showing,
@lainwir3d requestin…
-
after the other Wire/i2c issues have been closed ( #166 etc), and the speed got better, some I2C devices started working with the 101.
However, it's still far from _really_ working. Basically, in pra…
-
It would be useful if a firmata host could enumerate attached i2c devices on a firmata client.
A full scanner is not required, just the ability to detect the error from a wire.endtransmission .
cf i…