-
I am trying to get this driver working with an Archer T2UH plugged into a Raspberry Pi 3. It works fine if I give it a static IP address. But it can't connect using DHCP. If I do a tcpdump on both …
mexon updated
4 years ago
-
```
What steps will reproduce the problem?
1. Install AirCrack-ng 1.1 from source
2. Install other listed prereqs from apt-get
3. Attempt to install your package
What is the expected output? What do …
-
Some users (have to) run the Pi with a USB WiFi stick. Obviously they can't auto-connect so ideally we create a guide on how to connect to the Pi via a laptop the first time and create the WiFi connec…
-
Would it be possible to get a proper bootloader like U-Boot onto the ESP32-S3 and boot Linux with it?
-
Thanks for wifi-to-eth-route.sh! It's amazing and works.
I shared internet from Raspberry Pi to another linux device. Internet works.
My raspberry has ip 192.168.1.xxx. Another linux device has 192.…
-
Have you verified this driver in orangepi-zero2?After I compiled, I found that I did not find that the device when linux booting,and driver was not running。
my dts:
&mmc1 {
vmmc-supply = ;
mmc-p…
-
-
```
What steps will reproduce the problem?
Install Connectbot 1.7.1 on Milestone 2 with:
System version: 3.23.0.A953.Movistar.en.01
Android version: 2.2.2
Kernel version: 2..6.32.9-g59bc4cd
wmo038@zb…
-
```
What steps will reproduce the problem?
Install Connectbot 1.7.1 on Milestone 2 with:
System version: 3.23.0.A953.Movistar.en.01
Android version: 2.2.2
Kernel version: 2..6.32.9-g59bc4cd
wmo038@zb…
-
```
What steps will reproduce the problem?
Install Connectbot 1.7.1 on Milestone 2 with:
System version: 3.23.0.A953.Movistar.en.01
Android version: 2.2.2
Kernel version: 2..6.32.9-g59bc4cd
wmo038@zb…