-
**OsmAnd information**
OS: Android 5.1.1 and 6.0.1 (problem may happen in other versions too)
OsmAnd versiojn: Osmand~ v. 2.6.0#5853M_2.3 (actually happens in all versions, included the on…
-
I had a local patch in my homeassistant docker build to switch ElectricalMeasurement to 3 decimals
https://github.com/zigpy/zha/blob/dev/zha/application/platforms/sensor/__init__.py#L555
I added …
-
During one test, one Pis used an IPv6 address to register on the server and that same PI didn't start measuring once connected to the power meter. Starting measurements from the GUI worked fine though…
-
Is 802.11k support in these drivers? Particularly interested in the device supporting sending beacon-reports and link-measurement reports when requested to do so.
Can it be enabled with a driver opt…
-
## Version of the custom_component
0.0.1
## Configuration
```yaml
# Loads default set of integrations. Do not remove.
default_config:
# Load frontend themes from the themes folde…
-
Code sample specifies that scrollbars should be excluded from the clientWidth/Height measurements. I agree this aligns better with some of the scenarios we've discussed (e.g. "is in view" checks, pse…
-
Viktor Glatz's screen shot showed that:
The r…
-
### System Health details
## System Information
version | core-2024.2.2
-- | --
installation_type | Home Assistant Container
dev | false
hassio | false
docker | true
user | root
virtualenv …
-
**I hope Azure Kinect can also provide its (relative)position and orientation information, not only raw acceleration value.(just like the Hololens can do splendidly)**
I've tried to make these feat…
-
I'm trying to get data from a simple temperature sensor over the network via modbus. The device is accessible via the provided windows software, but doing it with modbus-cli would be much nicer.
Th…