-
everything was fine, print lifted from bed and looks like a bunch of plastic blobbed around nozzle, now I have no power coming from the P2.7-E1 port on the board?
I guess I could move to E-2 P2,6 but…
-
@S1CAR1US here the ticket
Hi Luc, not sure you remember me but I been around since the beginning. I had talked to you a couple years back about the z probing with an e3d nozzle... Now I am not sure w…
-
I'm using a MKS SBASE V1.3 with MKS TFT32 V1.1
Any idea what is wrong? Same issue as here: https://github.com/makerbase-mks/MKS-TFT/issues/12
But I have that V1.1 display and it's still not working.…
-
Hi, In the directory /Red style/Classic/ you have a file (and only in this folder) Mks_WIFI.ino.bin, so when I'm updated my TFT, I copied this file too in the SD card, except now the WIFI don't worki…
-
Building and flashing works like a charme but i'm not sure how to connect to DuetWifi and what needs to mapped in the Firmware?
I've seen from the Picture that +5V and GND seems still connected to …
-
Hi, On my TFT (V2.0.1 English) the TFT WIFI module make an error :"Exception" . I try to upload the MksWIFI.ino.bin without success, still same error.
-
Using the latest Firmware and an MKS WiFi module connected to the MKS TFT, I can send an M303 command for PID autotuning, which will cause the hot end t cycle through temperatures as expected, but it …
-
@Roxy-3D, I got that LCD [here ](http://www.ebay.com/itm/US-3-2-MKS-Touch-Screen-TFT32-LCD-Display-Controller-for-3D-Printer-Kit-RepRap/172659190494?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m274…
-
System Information
-----------------------------
MultiMC version: 0.6.2 (Stable)
Operating System: Windows 10 (64-bit)
Summary of the issue or suggestion:
------------------------------------…
-
hello,
i updated the firmware,all is allright,but the screen doesn't communicate with the machine,when i give an order nothing happen.The temperature isn't detected,it doesn't heat,,i setted to aut…
babaz updated
7 years ago