-
Hello dl12345,
I have compiled the source driver for this device in openwrt-chaos_calmer (15.05) kernel ver: 3.18.29.
And cross-compiled good.
insmod /lib/modules/3.18.29/8812au.ko loads good a…
-
When building s390 allmodconfig with clang-14 on mainline, I see the following error:
```
In file included from drivers/infiniband/core/cma.c:9:
In file included from include/linux/completion.h:1…
-
```
[ 51.681439] br-lan: port 3(phy0-ap0) entered blocking state
[ 51.687037] br-lan: port 3(phy0-ap0) entered forwarding state
[47145.233431] Kernel bug detected[#1]:
[47145.237047] CPU: 1 PI…
-
#### Community Note
* Please vote on this issue by adding a 👍 [reaction](https://blog.github.com/2016-03-10-add-reactions-to-pull-requests-issues-and-comments/) to the original issue to help th…
-
I followed the instructions from the README on building and installing patches for the RPI3B. I've been running into an issue where after I install the firmware patches my wlan0 device vanishes.
By…
-
系统都是静态IP方式：
1.1 如果接到路由器上或者路由器带的交换机上系统没有问题，wiz_socket.c中的wiz_socket函数中的socket_state = getSn_SR(sock->socket)正常为0；
1.2但如果直接接交换机上则创建socket会失败，跟踪发现socket_state =0x22,所以会-1返回，查手册ox22是socke…
-
```
I would like to know if it possible to set the content-type metadata using s3fs
mount options.
I'm using ahbe conf to set some Content-Encoding, but we are having problems
using javascripts wit…
-
**Is your feature request related to a problem? Please describe.**
I'm bridging the zt adapter to Linux bridge, but have to resort to "hacks" to get the bridge set up before the tap adapter is cons…
-
We got an Accton/Edgecore AS5114, but the ONIE support is not upstream. @david56, do you know more about the upstreaming status?
```
# fw_printenv
arch=arm
autoload=no
baudrate=115200
board=mv…
-
hi, I just installed waydroid and trying to try it out, but the container will not start on my system. When I inspect the logs, I see this:
```
(019079) [17:53:22] % mount /usr/share/waydroid-extr…