-
**Is this the right place for my bug report?**
This repository contains the GPU firmware used on the Raspberry Pi. This software is the closed source part of the Raspberry Pi system, it includes boot…
-
Please see anfegori91's post at https://github.com/ivmech/ivport/issues/21#issuecomment-250534439
It's got a nice picture of the issue. Re-posting here since our questions are about the V2.
Looks lik…
-
All this looks like we are exploiting a firmware bug.
A sequence of
```sudo ./led-badge-11x44.py -s8 -m4 ++++++```
```sudo ./led-badge-11x44.py -m9 fragment```
shows quite reliably the text 'fr…
-
Hey! I stumbled across your repo and managed to build XNU successfully however I have issues booting it. I have a little bit of experience with ARM64 and managed to patch [limine](https://github.com/l…
-
Hi guys.
Just dropping in to mention that slow Tic80 issue is back. It showed up early on in 1.0, got fixed with an updated and compiling from scratch and now the issue is back in version 1.1.2837…
-
I created this thread as a means to collect feedback about your experiences using this solution. Installation pictures and screenshots are highly welcome.
-
Hey i don't personally own a ZuluSCSI device but am using the 4 bit SDIO implementation of ZuluSCSI. I ran into some limitation in terms of write speed and got stuck around 10 MB/s and the latency of…
juico updated
11 months ago
-
This line in the /boot/config.yxy on my rpi3, gives the rainbow screen and the RPI3 does not boot.
dtoverlay=i2c-gpio,bus=3,i2c_gpio_delay_us=1,i2c_gpio_sda=23,i2c_gpio_scl=24
-
Dear denvera,
I successfully installed the DSC node server.
Now the hard part (at least for me):
> This is a front end server written in Node.js that talks to either the dscmod kernel module or an…
-
After updating my old OSMC install to current version I got non-working HDMI with my monitor. Spent several hours debugging and nailed it down to something that had changed between 1.20190517 and 1.20…
lexa2 updated
4 years ago