-
Dear
I am using the NRF52832, using the following prj
```
##########
# for GPIO
##########
CONFIG_GPIO=y
##########
# for BLE
##########
CONFIG_BT=y
CONFIG_SENSOR=y
##########
# f…
-
**Describe the bug**
Windows 10 reports a transfer error after writing the last block. Similar to https://github.com/adafruit/Adafruit_nRF52_Bootloader/issues/46. The transfer is successful.
**S…
-
#### Description
The I2C baudrate is always derived from `CLOCK_CORECLOCK`, even if a different `.gclk_src` is selected. If `CLOCK_CORECLOCK` is too high, the resulting baudrate will is too big and a…
-
It seems something about #2297 broke the status neopixel, at least for Winterbloom Sol boards.
Firmware built from previous revisions works fine, and all firmwares built after the change are affect…
-
**Is your enhancement proposal related to a problem? Please describe.**
This is to keep tracking of drivers to DT_INST related to Atmel SoCs. The worked started with #22806.
**Describe the solut…
-
Using SAMD Core 1.5.7 and TinyUSB_Arduino 0.7.1 I can't get any of the examples I tried to work, the Serial port never comes back after uploading and Windows reports a malfunctioning USB device.
Test…
-
Hi there!
Been following along with the make a board instructions and hitting some road blocks. When I try to compile my custom board errors are thrown for all non-standard named pins.
```
con…
-
I tried to follow the tutorial on the adafruit website
https://learn.adafruit.com/nes-emulator-for-arcada/overview
And I think I have all the Arcada libraries installed, but I'm getting a compile er…
-
Can you please tell where did you find the list of Register Names and functions that you used in your project.
![Capture](https://user-images.githubusercontent.com/30014834/58870615-2bf74d80-86de-11e…
-
How does your code know to select TC3 instead of say, TC4 or TC0?