-
```
What steps will reproduce the problem?
1. When the the temperqature drops below zero the sensor gives wrong readings
See: http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1289330809/0
What is the…
-
In OTX it is possible to filter (moving average) the telemetry stream of a sensor to reduce noisiness. It would be great to have a similar option in Ethos.
-
The AML parser expects values to be paired with their raw sensor readings, like this:
port1[data=Cond,0.000000,mS/cm][rawi=ADC,563,none][data=TempCT,23.881313,C][rawi=ADC,428710,none]
Howeve…
rgov updated
7 months ago
-
I'm using this with Raspberry Pi and Rainbow HAT. If I leave it running the temperature shown steadily increases. It might be case that I need to add heatsink to the processor but wondering if perha…
-
On the main Fermentrack page (which lists all installed devices), the purple box for gravity sensor that says, "Current Gravity" continues to display the last known value after the Tilt goes dormant. …
-
Is a schematic available for the hardware? Your example source includes light sensor readings as well, is this accurate?
-
When I first connect to the server I get two messages:
"Yay, I'm alive" which seems fine and another which says "Error 1: status websocket not available" which is all red and ominous.
I can't see eit…
-
Sorry this is not a issue, but could I use both ros bridges to use them standalone in a rover? Im open to any possibility, use the CC3D Revo like a motor controller and receive the commands (msp I gue…
-
High Adrian,
The 1100a gateway can not be included in climate function.
Is this as designed?
Regards Raymond
-
The missed readings alarm seems to trigger after only about 2 to 3 minutes worth of "missed readings"; so in reality there aren't really any missed readings. Suggesting setting this to a sane value (a…