-
I love Slic3r. I am working on a model now that would print great with vase mode, but need structural support on the bottom to work. I would like to be able to have the bottom of the print as normal, …
-
One of the pieces I am trying to print with support has a very long, narrow overhang.
Slic3r's support generation is calculating a few very tiny pillars that can easily get knocked loose from the be…
-
When a solid has a cavity, and thus has two nested shells, OpenSCAD exports the inner one with reversed normals. The usual trick is to make a tiny hole connecting the two shells to make a single one.
…
-
I just found a support material overlap issue with parts that are closely arranged together:
![3D plater](https://www.dropbox.com/s/b363ym3k20efzpq/3D-plater.png?dl=1)
Both parts are plated as separ…
-
The new spool holder can apparently break rather easily, so people may need to print replacements.
Can you please provide the exact Slic3r settings for the `Spool-holder.stl`, e.g., print settings,…
-
### Version
Slic3r-master.2018.04.13.1651.df993c5.64bit
### Operating system type + version
Windows 10
### Behavior
In some cases the infill (specifically the inner support of top layers) ove…
-
If you set slic3r to use 0% infill, and also enable "Avoid crossing perimeters", then it never finishes generating the g-code.
If the part is effectively solid because the perimeters fill all voids…
-
Hi,
I'd love to see a functionality to open and preview existing GCODE files with the new 3D awesomeness!
Maybe this could be offered in a separate window via the app menu, making use of the "previe…
-
### Feature request
It would be great if you could save the plate and all active settings in a single "factory" file, so you can transfer everything and save for future retrieval later even if any co…
-
### Version
Whatever's next, preferably 1.3.0
### Operating system type + version
Windows 7
### Behavior
As someone who prints in ABS, I hear it time and time again to NOT use a printing fan.…