-
"To avoid interferences from the MCU, bridge RST to GND on the MCU too."
how to disable the mcu is not actually stated.
where is this chip? is it under the esp daughter board? on the rear of th…
-
Hallo,
ist es möglich eine Funktion einzubauen, mit der eine Nulleinspeisung über die AhoyDTU realisiert werden kann.
Ohne Zuhilfenahme weitere Komponenten (MQTT Server, NodeRed usw)
Optimal wäre…
-
Hi. First of all, thanks for this amazing project! I really want to do it, and during the analysis, I had some questions regarding the fan.
If I understand correctly, the firmware of the Ikea board…
-
[Arlec Smart Button - SG022HA](https://www.bunnings.com.au/arlec-grid-connect-smart-home-button_p0434998)
Requires a [SG120HA HUB](https://www.bunnings.com.au/arlec-grid-connect-smart-home-control-…
-
I am looking for a compatible 80 amp smart switch.
There is several products working with tuya on AliExpress. But I can't find one confirmed to include an esp8266.
Is someone is able to flash th…
-
Related to https://github.com/reloxx13/TasmoAdmin/issues/375#issue-619544242
I'm using a LilyGO ttgo-t-eth-poe. When configured for Ethernet I'm assuming it's not returning expected data and the st…
-
I have a a tasmotized geekcreit ESP8266 module with a BH1750 Illuminance sensor attached. It is configured and displaying fine in the Tasmota web gui.
TasmoAdmin found and displays the module fine b…
-
Need to add boards variant and associated ld scipts for 8295
khcnz updated
7 years ago
-
For some reason my button directions are opposite to opening and closing actions on the shutter. Up arrow brings the awning down and vice versa.
Similar to flipping the percentage, can we also hav…
-
Is the Temperature Sensor AddOn for Shelly 1/1PM supported?