-
After following the instructions, I now have telnet access, but in HA I keep getting failed to connect errors.
Firmware the unit shipped with is `3.3.2_0001.0004` and I haven't updated. Do we need …
-
As discussed on ##linux-surface, hardware buttons on some Surfaces are not working. Reloading the button module works post-boot:
```
sudo modprobe -r soc_button_array
sudo modprobe soc_button_array…
-
### Describe the bug.
When you try quitting an app very quickly _(by clicking/spamming the back button rapidly)_ the OS crashes and returns an error: **furi_check failed**. Keep in mind that the app …
-
version: OpenWrt 21.02.3
kernel version: 5.4.188
my board have three PCIe device, just can use first 2 device, third device cannot detected
```
[ 1.298144] rt2880-pinmux pinctrl: pcie is al…
-
Hi,
Sometimes, my cubiboard blocks in the startup and it's impossible to do anything, no shell, no ssh. I don't others choices that to disconnect the cubieboard from the power.
I have a cubieboard …
-
I just bought a "DeLock 87445" because I wanted a small compatible hub that doesn't need an external power supply. The VID and PID are the same as in the list (05E3:0608). I tested it on three systems…
vkahl updated
11 months ago
-
**Device Information | RK3399开发板**
- SOC: RK3399
- Model: GC18-108-RK3399-V2.0 (开发板中间扩展槽边的丝印）
-
Kernel version: Linux surface 6.0.9-surface #1 SMP PREEMPT_DYNAMIC Thu Nov 24 19:45:07 UTC 2022 x86_64 GNU/Linux
CPU: Dual Core Intel Core i…
-
I'm not sure if I can be of any use to you but I have a Raspberry Pi5 already in my hands as I was part of the test group for it. If you'd like any testing done on it i'm happy to help. I did try to g…