-
Hi,
Thanks to co-work with @adonislixi on issue #151, we found there is a setting problem in funtion RxWindowSetup:
Radio.SetMaxPayloadLength( modem, MaxPayloadOfDatarate[datarate] + LORA_MAC_FRMPAY…
-
Bonjour tout le monde!
Une petite démo des possibilités (non exhaustive) de Jarvis pour ceux que ça interessent, à la base pour montrer sur un groupe facebook donc pourquoi pas ici ;-) désolé pour …
-
Hello,
I have been struggling with my RFM69HCW modules for a while. Even though the transmitting side seems to be working, I cannot receive anything at the other end of the transmission. I started …
-
The 802.15.4 layer doesn't appear to support 900Mhz Zigbee.
Could we get a version that does support 900Mhz or could you indicate what needs to be changed in order to support 900Mhz operation?
-
Hi,
thanks for the plugin.
I'm operating a
http://busware.de/tiki-index.php?page=CUL-V2
device with my Raspberrypi 3.
Would it be possible with this plugin to control these Intertechno devi…
-
Hello,
Thanks for writing this library - I wasn't looking forward to hand cranking it myself. It doesn't seem to work for me though. I assume I've not wired my Arduino Pro Mini to the Zeta chip cor…
-
The best antenna lengths have been determined for 868MHz and 915MHz. Make it easy for users to adapt the board for their chosen frequency. It also probably makes sense to make the default length optim…
mogar updated
8 years ago
-
Hi, I wrote a simple script which sends a sample data:
```
-- ----------------------------------------------------------------
-- Send a frame via LoRa WAN using ABP
-- ---------------------------…
-
Hi All,
I have been trying to setup cc1310 launchpad based Web sensor demo for past few days now. I have followed all instructions properly (or at least that is what I think). I am not sure what I …
-
Any idea why the TX21-IT device (Thermo+hygrometer) is not supported?
It works fine with my RFM12 868MHz receiver (or a 868MHz CUL) without any code-change for both IT29 and IT21 - the data-protocol …