-
hello, I am a new and proud owner of blade of bladerf 2.0 xa4, a few days ago, I did a signal transmission test with bladerf at the frequency of 435.0mhz, the receiving device sees at least 437.0mhz, …
-
Possibly using the monitor mode interface created for sparrow WiFi would be really awesome. Actually, now I’m curious if aircrack would work. You’d also have like three SDRs going at one time with the…
-
I have tried to follow the steps in [documentation](https://github.com/Nuand/bladeRF/wiki/DC-offset-and-IQ-Imbalance-Correction#using-gnu-radio-and-the-bladerfs-rf-loopback-functionality) but i get t…
-
Hi Everyone,
I'm running at odroid xu4, which I understand isn't yet ported fully but hope someone may have got over some hurdles. My system is:
```
odroid@odroid:~$ uname -a
Linux odroid 4.14…
-
i just did a NEW UBUNTU-64 BIT INSTALL
and build gnuradio 3.10.* which is successful
BUT WHILE RUNNING gr-iridium
getting this error
File "/usr/local/bin/iridium-extractor", line 232, in…
-
Will this work with BladeRF ??
-
Running into an error while running `make`: `error: invalid conversion from ‘int’ to ‘bladerf_channel_layout’ `. Any thoughts?
Running on Ubuntu 16.04 x64
```
~/LTE-Cell-Scanner-master/build$ …
-
Universal Radio Hacker (URH) choose USRP record radio signal,there was an error as followings:
[ERROR::Device.py::log_retcode] USRP-OPEN (type=b200,name=MyB210,serial=30FB59C,product=B210): Error Cod…
-
### Steps to reproduce
Install gnuradio, gr-osmosdr, hackrf, libhackrf-dev on Macos and Ubuntu
Install gqrx on Macos
Install antenna and connect USB on HackRF One
For gnuradio-companion, create va…
-
Hello. I have a problem about 'fix location'.
With bladeRF and gps-sdr-sim, it was successful to generate fake GPS signals as you can see below:
![screenshot_20180806-151006_gps test](https://us…