-
First release
-
Hi,
I am working on supporting a new ILI9341 device, who use 9 bit SPI.
When I use spi_dev, to read ILI9341 register, with raspberry module, everything works fine. However, when switching to Nostro'…
-
Hi!
Quick question with regards to the spi drivers:
What is the reason for not switching from the spi-bcm2708 to the upstream spi-bcm2835 driver?
I wonder because I have a few improvements that I w…
-
Maybe it is better to use port 22 ssh to connect instead of port 3306.
These are currently open ports:
PORT STATE SERVICE
25/tcp open smtp
42/tcp filtered nameserver
80/tcp open h…
-
I search about it but only you use it:
- https://www.google.es/search?q=%22nectarine_defconfig%22&oq=%22nectarine_defconfig%22
- https://duckduckgo.com/?q=%22nectarine_defconfig%22
How can i use othe…
ehooo updated
10 years ago
-
openfst will not compile on Ubuntu 13.10 64-bit. (www.openfst.org site is currently down though openfst-1.3.3 and openfst-1.3.4 can be found on mirrors). Have tried numerous recommendations from the c…
-
Currently access to 1-wire sensors is hard coded to GPIO pin 4.
This should be fixed to allow configuration to any of the available GPIO ports.
https://github.com/raspberrypi/linux/blob/rpi-3.6.y/a…
-
In the old days (using vm.sh and rgmanager), a domain was never defined on a kvm server. In stead "virsh create" was used to start a domain in a non-persistent way and when a live migration happened, …
-
Hi,
I need some help debugging a USB transfer problem on my raspberry pi.
The problem is that the DVB Transport stream recorded from a USB DVB stick (cinergy htc stick)
attached to a usb hub which i…
r10r updated
10 years ago
-
Could the bootloader set up the PL011 UART before it hands over to the kernel? Currently I have code in https://github.com/bootc/linux/commit/a91fe13824cde1187bb1acfdea7140c9ee0ba66c that sets up the …
bootc updated
12 years ago