-
I made simple stupid blinker on PA0 for ch32v203. It works fine.
My issue that when it assembled with clang instead of GCC it creates bit different elf file which somehow magically erase/disable inte…
-
**Describe the bug**
Using BK7231Flasher, I wrote down the firmware along with the configuration, went into the web server to change the startup command line, and was faced with the fact that I could…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues.
### Is this issue related to iced?
- [X] My hardware is compatible and my graphics drivers are up-to-date.
…
-
I have tried numerous tutorials, Arduino examples and I cant get an SD to initialize. There is a card inserted that is formatted with exFAT and there is one file test.txt. Particularly [SD Card Module…
-
Hello UKPLab/sentence-transformers. Looking for more visibility with my stackoverflow question here. Thank you very much.
https://stackoverflow.com/questions/72205350/how-can-i-reach-the-performanc…
-
For example, I want to set up a simple text-file-based config to set the default editor to vim.
At present I need maintain [150+ lines of python](https://github.com/jonathanslenders/ptpython/blob/m…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…