-
```
Just applied your latest firmware - 3.4.3.7-072.
Using a Huawei E5331 as a USB Modem, yet receive the response "Connect Script
failed" after applying the modem configuration page.
I have not be…
-
#### Description
This issue can happen with a mobile node, but it can also arise if the DODAG changes at run-time (e.g. with #14623)
#### Steps to reproduce the issue
##### Setup ZEP disp…
-
# Bug description
I have a Cintiq A1300 device connected over HDMI, and it appears to be detected on the i2c bus by get-edid:
```
$ sudo get-edid -b 2 | parse-edid
2
This is read-edid versio…
-
### Code of Conduct & Contributing Guidelines
- [X] I agree to follow the code of conduct and the contributing guidelines.
### Have you checked that no other similar question(s) already exists?
- […
-
Using the `mt7921e` driver on a `5.15.12` kernel for a `MT7921K` device.
When attempting to bring up an AP hosted with wpa_supplicant `v2.11` I get the following error:
`wlp3s0: Driver does not …
-
**Describe the bug**
I have usb-storage & xhci_hcd & swiotlb buffer problem filling systemd journal with SSD on USB, causing crash of my system during any DD operations on SSD disk
This is my f…
-
Radxa' [Dual 2.5G Router HAT](https://docs.radxa.com/en/accessories/dual-2.5-router-hat) features a PCIe Gen3 switch, the [ASM2806](https://www.asmedia.com.tw/product/012Yq70sX2zI9xN5/7c5YQ79xz8urEGr1…
-
Apologize for probably a basic question but I'm new to ESPHome and after a couple hours of trying to figure this out, I'm hoping to get some help.
I purchased a ratgdo v2.0 and flashed it via the […
-
### What happened?
for the given IR
```mlir
module {
func.func @"torch-jit-export"(%arg0: !torch.vtensor, %arg1: !torch.vtensor, %arg2: !torch.vtensor, %arg3:!torch.vtensor, %arg4:!torch.vtens…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…