-
-
Залил новую прошивку на станции версии 1. В целом все работает нормально, кроме программирования времени пробуждения станции. Например:
- если задать время и дату 17.01.2020 2:40, на самом деле в ст…
-
Hi, I have seen a problem with the OpenEVSE (firmware 5.0.1) with Wifi (firmware 2.8.1) when reporting temperature of -0.25oC. You can see from the attached picture of data logged to emoncms that ther…
-
Планирую в ближайшее время развести плату v3 с посадочным местом под чип 24LC256.
Ветка ext-eeprom.
-
From the beginning, when I started with snapcast, I was wondering why the snapserver sometimes stops a few seconds after boot and sometimes not. I changed the shortly released snapserver.service wha…
-
@georgejhunt @tim-moody @avni this could be a very useful addition for IIAB 7.1:
https://github.com/iiab/iiab/issues/1680#issuecomment-509675990
And if we succeed in making this work (beyond the…
holta updated
4 years ago
-
Clock runs slightly to fast...
Maybe add a 32.768 kHz crystal or an RealTimeClock IC after al?
-
Hey Arjan,
I'm noticing that after a while (>12ish hours), the time of day starts to drift or becomes off. It's currently displaying 21:50, meanwhile the time source is displaying 22:24. This is …
-
Got a new Pi 4B (rev.1.2, 4GB), running Raspbian buster and installed the RaspBee II to it.
I followed all the installation steps from https://phoscon.de/en/raspbee2/install, double-checked, triple…
-
**Project Name**
AGU Loom Kits
**Project Description**
We need 20 Loom kits for the AGU conference.
6 x hydra kits w/ PCB
- Pressure+Temp
- pH
- Turbidity
- EC
6 x terra kits w/ PCB
- Ca…