-
```
- What steps will reproduce the problem?
1. Configure and enable a joystick to output "ardupilot mega" data.
2. Select the "serial data" tab. Optionally, connect the GCS to a virtual
serial port …
-
Greetings!
Our team, **VectorU**, wants to stabilize model rockets using active thrust vectoring instead of typical passive techniques (i.e. not fins). Model rockets are fun and control systems are…
-
例子ui：
[design.zip](https://github.com/user-attachments/files/16082216/design.zip)
build.json:
```
{
"name": "menucase",
"version": "1.0",
"assets": "res/assets",
"author": "A…
-
## 基本参数
* 有效面积 > 50*50m,
* 反射率 > 90%？
* bootstrap反射面与框架总重 ~20吨
* 施工与自适应光学交换动量脚手架结构
## 聚焦面构成
反射聚焦
* 框架绷镀铝薄膜
* [气球镀铝薄膜](https://en.wikipedia.org/wiki/Echo_satellite)，球面，控制焦点，梯度材料改进球差，姿态
…
-
@krzysztof9nowak
I figured I'd start a conversation here. The charge controller repo is just a copy of the FUGU's hardware. This repo is very similar, but also includes more features.
A short ver…
-
```
- What steps will reproduce the problem?
1. Configure and enable a joystick to output "ardupilot mega" data.
2. Select the "serial data" tab. Optionally, connect the GCS to a virtual
serial port …
-
```
- What steps will reproduce the problem?
1. Configure and enable a joystick to output "ardupilot mega" data.
2. Select the "serial data" tab. Optionally, connect the GCS to a virtual
serial port …
-
I am currently testing a 4K 32 inches monitor, the BenQ PD3200U, and have noticed quite a bit of screen flicker during the transitions.
Are there any recommended settings for large 4K monitors to m…
-
So a few days ago I installed my SKR mini E3 on my Ender 3 with BLTouch, and after some initial troubleshooting, got it printing. Yesterday afternoon, I started getting a TMC Connection Error.
I ha…
-
Anyone experiencing quite loud ticking sound coming from somewhere around C3 capacitor, Q2 transistor when firing the pulse? It's difficult to pin-point the exact location, I rather not to keep my ear…