-
# Problem/Motivation
Just moved to the add-on from the standalone container. Now getting these errors and the state of my garage door openers is not properly reported:
[homeassistant.components.mq…
-
### The problem
Controls no longer available. Controls were previously available using the old v1 api, now Home Assistant notes the device as unsupported.
### What version of Home Assistant Core has…
-
Hi,
I use a shelly 1 in the "garage door opener" mode with an magnet sensor. Everything is working fine.
I have a problem with automation in the Homekit-App.
Why isn't it possible to select "a se…
-
Hi,
at the beginning...i am no expert in programming etc. :)
Today i received below mail from meross about the high frequency communication.
For now i am not able to connect via Home Assistant to…
-
### The problem
Garage Door Opener show up in tuya integration but says (unsupported)
### What version of Home Assistant Core has the issue?
core-2021.11.1
### What was the last working version …
-
### The problem
I've got a number of devices with the Tuya integration. I've noticed sometimes some entities stop updating randomly, while other entities (even for the same device) update fine. Resta…
-
### Link
https://aliexpress.ru/item/1005003610757320.html?srcSns=sns_Copy&spreadType=socialShare&bizType=ProductDetail&social_params=20428159193&aff_fcid=92a2b9469b184b528e2c9427d5b02d78-164045701159…
-
### The problem
LoraTap Tuya Garage Door Opener displays as switch/outlet. No Sensor to show if the door is open or closed or ability to open/close the door. Switch in HA appears as always on, switch…
-
If you run a shelly 1 as garage door and connect the sensor as "normally open" the order to check the state is the same like "normally closed" but should be reversed
Expected behavior:
Garage door…
-
First of all many thanks for this wonderful project :D
I was using RFLink and wanted to switch to something better ^^ and since I had a CC1101 lying around...
I have 4 sun awnings on my windows fr…