-
### The problem
Hello,
I can't join/unjoin my Audiocast M5 speakers between then and also between Audiocast M5 and Wiim mini
when i try to call the action below it errors out.
action: media_…
-
### Description
During Home Assistant startup warnings are logged regarding to a few variables have 'None' native measurement units.
### Actual behavior
Home assistant log is noisy and the va…
-
### Problem description
I have connected this thermostat to Home Assistant using Zigbee Home Automation and the SkyConnect dongle. The basic features work: the current temperature, set temperature, o…
-
### The problem
Hi there,
I am using Hassio through docker Container on my RPI4 and experience some weird output from pico2wave for some messages that I can’t really understand. Below service ca…
-
### Describe the issue you are experiencing
I have been successfully utilizing a nrf52840 MDK USB dongle, flashed with OTBR RPC firmware using west/zephyr as described by NRF52/openthread.io docume…
-
How/where to create modbus2mqtt.yaml?
9/4/2024 2:12:39 PM notice config configuration file not found /data/local/modbus2mqtt.yaml
-
### The problem
I have the following message in my logs, asking me to post the following here:
Logger: homeassistant.core
Source: core.py:552
First occurred: 1:35:17 PM (1 occurrences)
Last lo…
-
### Problem description
Only device exist, with anything else.
TS0601
por _TZE204_sxm7l9xa
Conectado a través de [Zigbee Coordinator](http://192.168.88.27:8123/config/devices/device/0bbeb1a896…
-
### Describe the issue you are experiencing
After upgrading to Home Assistant OS 10.4, the NUT addon no longer starts, seemingly due to a permission issue not allowing the UPS to be detected.
This…
-
### Bug description
I bought two temperature sensors on Aliexpress.
Once the zigbee devices are associated with ZHA, they start working correctly for the first 15/20 minutes, then they always report…