-
** Versions **
- Home Assistant version 2024.6.4
- This integration version 1.9.1
I just wanna use your heishamon integration together with home-assistant-aquarea integration (https://github.com/…
-
### The problem
I have a Samsung AE12BXYDEG/EU ASHP which is connected to SmartThings and from there to HA. Neither the official integration nor the HACS version (which I know is out of scope here) …
-
### Before submitting a new issue
- [x] I [redownloaded the latest release](https://my.home-assistant.io/redirect/hacs_repository/?owner=signalkraft&repository=mypyllant-component) and restarted Ho…
-
Hi, can anyone help me get started?
I bought the ELM that is linked in the readme,
"bbfly Forscan Elm327 ELMconfig USB VINT-TT55502 mit MS-CAN für Ford OBD2 Diagnose"
but cannot get it to work (…
-
In my house I have some F430s controlled by thermostats.
I will like to know each actuator status, this is described at paragraph 1.5.8 in WHO 4 manual.
Do you want to add this as sensors or binar…
-
There are 3 valves, one major valve opening to allow for the water to drain, but the two other small valves seem confusing enough that I don't know what it does.
This is just my personal feedback.
-
Thanks for integrating the myVaillant support that fast!
I did the upgrade to myVaillant yesterday, now I do not see any energy consumption values. Would it be possible to make them accessible in i…
-
Hey,
I hope someone can help. I have a underfloor heating capable of heating and cooling. In both cases I need to open the same valve. The hvac mode of the thermostat will be set by an automation r…
-
I have an old BB30 with 2 buttons. One for 1000w and one for 1500w. These buttons are a litle loose so a played with a idea using 2 SSR relays instead of the buttons. Then the PID logic must be rewri…
-
Hello,
I wanted to post this on the forums, but they seem broken: I have attempted to create accounts with two different e-mail addresses, but none of them receives the activation e-mail.
The ne…