-
```
it should be checked if set contrast works for this device:
U8GLIB_SSD1306_128X64
u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST);
```
Original issue reported on code.google.com by …
-
```
it should be checked if set contrast works for this device:
U8GLIB_SSD1306_128X64
u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST);
```
Original issue reported on code.google.com by …
-
## If you believe there is an issue with the firmware itself please follow these steps:
1. Describe your problem;
Everything looked fine when I have recieved FC from the manufacturer
Betaflight co…
Be133 updated
6 hours ago
-
hi im using given excample and its working, im 100% connection is good, i used i2c finder and there is device at 0x44 but nothing is happening
-
If I were to write a sysfs attribute, in most cases, `cat`ing it back should result in the same data I wrote, plus a newline being printed. Unfortunately, there doesn't seem to be a way to mock that b…
-
**Describe the bug**
I ran `setup-audio` on my IdeaPad 3 Flex Alderlake-N Chromebook and speaker or headphone did not work, `aplay -l` showed only HDMI outputs and KDE desktop config only used null…
-
```
[ 6.461701@1] Meson KeyInput init
[ 6.464970@1] Key 116 registed.
[ 6.468170@1] input: key_input as /devices/platform/key_input.4/input/input5
[ 6.475303@1] Meson KeyInput register RTC…
-
```
[OpenDR PowerLogger] Found 0 power devices
[OpenDR PowerLogger] Estimating background power load for 3 s, please do not use the system.
[OpenDR PowerLogger] Idle power: 0.000 mW
Exception in…
-
Hi. According to the documentation, the two functions below will return the number of bytes that the master has received from the slave and which are available in the buffer.
> [Wire.requestFrom()]…
-
I have a Zenith Extreme and borealis doesn't seem to be able to find the I2C interfaces.
```
smbus: /sys/bus/pci/devices/0000:00:14.0
i2c-sys: /dev/i2c-3
thread 'main' panicked at 'failed to loc…