-
i flash my pm3 rdv40 to [this](https://github.com/proxmark/proxmark3/tree/bed3db8f1dea15b9e998c3c4c432c58c5eb565eb) firmware version but it still pop up a window told me my firmware is incorrect
-
How can we able to clone or read the pin of A sim card with RDV4?!
Thanks
-
With the remake of legic commands, the existing scripts from @mosci doesn't work anymore.
-
It was working fine till this morning but now it's not connecting anymore. There is no lights with or without the battery and even on usb connection. It gets detected in Chameleon REBOOTEDGUI for like…
-
I successfully flashed my chameleon mini with the firmware here and my chameleon mini detects fine in rebooted gui. However the switch button is not working and it is not able to switch cards. This on…
-
always show "Trigger kicked!" when using "hf snoop". i try to snoop a key from m1 card and reader by using pm3. when i type hf snoop command then put pm3 near the reader i will receive "Trigger kicked…
-
Hello,
Following instruction :
```
In order for PM3 RDV20, PM3 RDV30 etc to be flashed with RRG Repo , you must edit these two Makefiles. You need to remove
1. client/Makefile …
-
now i use ChameleonMini live debugger, but i think this app is hard to learn to use than windows GUI by iceman. I still did not know how to upload a dump file to my devices. i think iceman GUI for win…
-
From: https://github.com/iceman1001/proxmark3/issues/247
Sometime it is useful to be able to unhang the i2c. Normally would be unplug pm3 but that is a too blunt method to use.
Link to sugges…
-
Hello
I have a ChameleonMini REV-G and Have 2 problem :
1- After I Clone the Project;How Can Run that to see the GUI?
2- How Can I read the Reader then From it Find the Key and Clone a card To open…