-
Does this work on ESP32-C3 or any of the other variants?
-
The light-switch in the example fails to build every time due to the zap-cli. I don't seem to find any solutions.
Error Code :
Searching for zcl file from /home/vallabh/MatterPrj/esp-matter/connec…
-
Hi, first I'd like to thank anyone who takes the time to read this, sorry about misspellings and any weird things I'm new to Rust and English is my second language :)
I'm trying to make a flight co…
-
### Board
ESP32 Dev module (Wroom-32)
### Device Description
Wired on readboard
### Hardware Configuration
RC servo / motor driver.
### Version
v2.0.9
### IDE Name
Arduino I…
-
### The problem
Updated to latest stable in home assistant today - 2023.3.0 - and saw the new ili9xxx component added.
Attempt to switch from a working ili9486 config using an old PR - https://git…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I had stuck for this error, I use ESP32 cam with OV 2460 camera module. The device is connect, and it works well when I open an IP that given by router, but the problem is the camera would not capture…
-
Hey,
I followed the instructions in the README.md, however, no AP shows up for me.
Also a fixed setting of the wlan access data in the settings.h file does not work.
I have no idea what the probl…
-
The ESP32-C6 has an onboard WS2812B. The light example is configured to use pin 8 which is the data pin for the WS2812B but it is using ledc commands instead of RMT. The result is that the WS2812B t…
-
Hi,
I have been trying to use BF3005 camera and simple example code to take a picture every 10 seconds in the main loop. I notice a very strange behavior : the very first picture seem to be fine, …