-
the led limit would be gone if you use ws2812b (rgb led) they have basicaly 1 dataline as communication bus they work fine with the 32u4
https://www.parallax.com/sites/default/files/downloads/2…
-
Following Upgrade the leds are deactivated, furthermore they are unable to be set. Steps followed as well as version information is listed bellow.
Steps:
Connect to Chameleon using Minicom
version? …
-
Helo:
I download the last version of RevE for my Chameleon-mini, I tried to write the new firmware using the following sentence:
avrdude -c avrispmkii -p x32a4u -P usb -e -U flash:w:Chameleon-Mini…
-
8 /dev/null
[arduino/standard/libr…
-
mario@raspberrypi:~ knxtool groupswrite ip:192.168.178.15 1/1/2 0
Send request
mario@raspberrypi:~ $ sudo tail -f /var/log/daemon.log
Dec 3 11:33:07 raspberrypi systemd[1]: Listening on KNX Daemo…
-
Hi,
# Background
Some of you might have seen my port for the Infinity Ergodox for the TMK firmware [here](https://github.com/fredizzimo/infinity_ergodox). While the port works, and I don't have any m…
-
Hello,
Just tried your library on my atxmega128a4u chipset but couldn't get it to work. Here are my local changes:
```diff
diff --git a/usb_requests.c b/usb_requests.c
index 91c5cf5..3b67889 100…
Risca updated
7 years ago
-
I am trying to compile for a s60-x an already written layout but getting the following error:
-------- begin --------
avr-gcc.exe (WinAVR 20100110) 4.3.3
Copyright (C) 2008 Free Software Foundation, …
-
Hello, I implementing MIDI class.
Some USB MIDI device have multiple interface. But the first interface may not have an endpoint.
In this case, enumeration is fail.
```
Configuration descriptor
0…
-
I see that this is already on your todo list. How hard would this be? What would be required?