-
I am testing BC66-TE-B-KIT without SIM. Just want some data print on serial for now.
I uploaded BC66NBR01A04V01 firmware to BC66-TE-B-KIT, then
I uploaded code successfully to BC66-TE-B-KIT.
Afte…
-
Telit just confirmed that they're phasing out the SE873 in favor of the SE873Q5. Unfortunately, the Q5 contains a DC/DC switch which literally craps all over the marine VHF band, raising the AIS noise…
-
Hi ,
I am facing the exact same issue. Using GSM module and esp32 together , when GSM module tries to connect to Network the ESP32 reboots with following logs:
rst:0x1 (POWERON_RESET),boot:0x13 …
-
PIO Core Call Error: "The current working directory /Users/nav/Documents/PlatformIO/Projects/BG95 will be used for the project.\n\nThe next files/directories have been created in /Users/nav/Documents/…
-
PIO Core Call Error: "PlatformManager: Installing platform-quectel\n\n\nError: VCS: Unknown repository type https://github.com/Wiz-IO/platform-quectel"
-
Hi,
I was trying to use QCSuper with this Quectel module, but it did no show any RRC messages in wireshark. I found there are new channel_types specific for NB-IOT (--verbose).
After looking at the …
-
Hello,
I am unable to connect with the device over usb and perform backup's or flash. I just bought the device and I got it today.
Please see the related ticket: https://github.com/Wiz-IO/Arduin…
-
Hi, it's possible to interface this module with external MCU and send AT Commands from (for example) an Arduino or ESP32?
It's possible to have some examples?
Thanks
-
PIO Core Call Error: "PlatformManager: Installing platform-quectel\r\n\n\nError: VCS: Could not process command ['git', 'clone', '--recursive', '--depth', '1', ' https://github.com/Wiz-IO/platform-que…
-
Hi I have problems to get the TinyGSM running on my board.
With this AT commands I can establish successfully a connection:
```
// Band Configuration
// 1NCE: 80 for Band 8
bg96_at("AT+QCFG=\"ban…