-
Wenn ich das PlugIn installiert habe, und dann öffnen möchte wird mir
Error Loading Page
angezeigt.
-
I'm using the CM4 with a custom DSI display.
I have it working under Linux by using an overlay and a custom entry in the `simple-panel.c` file.
However on boot, before the kernel takes over the DS…
-
I'm having difficulty getting my Seeed WM1302 (based on SX1302) SPI concentrator to start. It is mounted in the Seeed WM1302 Raspberry Pi HAT on a Raspberry Pi 4 (64-bit) running Raspberry Pi OS Lite …
md4k9 updated
2 months ago
-
This took me a long time to get to the bottom of (i.e. that it's battery related) so sharing my understanding. I can reliably reproduce with the BP7X battery when it's down to about 8% or below. The r…
-
Would it be possible to have NUT support so that PiJuice data can be accessed from other hosts?
NdK73 updated
6 months ago
-
Hallo,
Die [Heizkörperthermostate von eq3](https://www.eq-3.de/produkte/eqiva/detail/bluetooth-smart-heizkoerperthermostat.html) haben bluetooth und sind recht Preiswert. Es gibt von Heckie75 die M…
-
Hi @hzeller, first off thank you for creating this excellent library. The documentation is fantastic and has been very useful to get started.
I'm having an issue running a long-ish chain of 32x64 P…
-
Hello all, thanks for any tips you can give me I have been trying all kinds of things I've read on here to get these to run any of the demos properly. I've tried tons of combinations of command lines.…
-
my GPIO Fan stays running all the time
-
__Steps to reproduce:__
After a server reboot I'm getting the following error on InfluxDB startup:
2021-01-13T16:38:31.182037Z error Failed to start nats streaming server {"log_id": "0…