-
Hi Maarten,
as already discussed I have a TTGO T-Beam V1.0 which needs a different setup, especially when it comes to the Power Management IC AXP192:
T-Beam version V1.0 official Pinout schema (ac…
-
Hi,
I'm trying to re-use the code I've had with the M4 CAN Feather boards and it's just not working.
It seems that me having code such as
```
can_message_one = mcp.listen(matches=[canio.Matc…
-
Board: Heltec HTIT-WB32LA
Espressif: ESP32 Arduino 0.0.1 (Latest as of Mar19th 2018)
Heltec: most recent as of Mar 19th 2018)
Arduino IDE: 1.8.5
I've tried several ways to configure the OnReceiv…
-
apa102 module is not available in firmware.
Uploading a generic Dotstar driver (https://github.com/RobertJBabb/micropython_generic_apa102/blob/master/generic_dotstar.py) allows the LED to be access…
-
I have tested the simple example for SPI using the same BME280 you recommended.
It is not working - the error is "unknown model"
Linux kernel: Linux 6.6.31+rpt-rpi-v8 aarch64
Setup using r…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…
-
```
On the attached photo you can see the backsides of two 128x64 displays with
ssd1306 controller.
The display color of the right one is white and the color of the left one is
yellow/blue.
Both dis…