-
Hi,
I installed the plugin. But I am unable to actually make it work. (I had an earlier issues with permissions but I no longer get the error).
rtl_433 finds the sensor all right. I was able to get …
-
```
What tool are you using?
ODK Collect 1045 (Device LG G2)
What is frustrating, troubling, annoying or lacking?
A new widget to record compass bearings was added to ODK collect in Oct 2013.
See:
h…
-
```
What tool are you using?
ODK Collect 1045 (Device LG G2)
What is frustrating, troubling, annoying or lacking?
A new widget to record compass bearings was added to ODK collect in Oct 2013.
See:
h…
-
I thought that the gyro readings were supposed to be in degrees, but on my iPhone SE (in Thunkable Live or built and loaded), but for the alpha angle, spinning the phone flat on the table by 90 degree…
-
**Describe the bug**
When the Nonin OEM III is plulgged in after the firmware has started, the firmware stops getting new readings from the SFM3019 sensors.
**To Reproduce**
1. Start the backend …
-
Sensor Measurement Lists (SenML) is an important spec for sensor data.
- https://www.rfc-editor.org/rfc/rfc8428#section-12.1 is an embedded SenML Units Registry
- https://www.rfc-editor.org/rfc/rfc8…
-
A wee status for today:
- We've got the basics of the prototype working. Here is a photo, and there are some videos floating around.
![prototype-1-small](https://user-images.githubusercontent…
-
Support automatic restarts. Raw notes / requirements copied from gitter to here:
- Restarts should be on day 7 for g5 and day 10 for g6.
- Don't waste 3 days of a coded no-cal start.
- Restarts s…
-
```
What steps will reproduce the problem?
1. When the the temperqature drops below zero the sensor gives wrong readings
See: http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1289330809/0
What is the…
-
I'm testing test_powersupply_readings.robot
It is necessary to read powerinputwatts and poweroutputwatts, but I refer to the correction of the issue and set LABEL_power1=psu1_input, which contains …