-
What i want is scale Laser power down while accelerating / deccelarating. I think this would solve the problem of deeply burned edges and other small figures.
It can be easily done in st_prep_buffer()…
-
I cannot stop the tft disabling the stepper motors after every print which causes print head to drop into work piece.
I have checked the stepper timeout, sd print release settings, and end gcode. …
-
### Description
Prints freeze in place after G92 E0.
Prints have to be force continued from there. This occurs randomly, usually on prints >20 minutes.
### Steps to Reproduce
Start a print…
-
I just finished printing a box for my ramps board and LCD and if i put it all together the reset button on the arduino board will be out of reach, but the one on the LCD is already incorporated in the…
-
# EDIT: Issue closed due to descending 'tone'
## Please see [PR Request](https://github.com/MarlinFirmware/Marlin/pull/16156)
### Bug Description
I have read the code of conduct and I'm trying …
-
#### Description
When upgrading from the website
**commands="npm install -g cncjs@latest; pkill -a -f cnc"**
pkill does not recognize `--a` flag
#### Versions
- CNCjs: 1.9.21
- No…
-
#### Description
...coordinate system is changed (using G54 etc button).
I was always using grbl (where it worked just fine) but recently moved to Marlin 2.0 (bugfix) + SKR 1.3 board because I w…
-
### Description
servo angle oscillates with stepper motor action
### Steps to Reproduce
1. verify servo is working via `M280 P1 S0`, etc
2. produce some stepper activity, such as `G28`
**…
-
Is there a easy way to set the LPC pin config to open drain output for using external stepper drivers with optoisolators?
Thanks
Jim
-
#### Description
Describe the issue or feature request in detail. Take a screenshot or record a video will be helpful.
#### Versions
- CNCjs: 1.9.2
- Node.js: 6.x
- NPM: 5.x
#### How Do …