-
### What happened?
Referenced from reply on slightly different error.
Facing this after updating fw:
```
[13:19:54] INFO: Preparing to start...
[13:19:54] INFO: Socat not enabled
[13:19:55]…
-
### Current Situation
I picked up a few of these boards and I am hoping I can get this project loaded up on them? Unfortunately I'm having a hard time picking the right board/platform (I think?)
h…
-
Hello,
The cover-time-based component works great to control my rollers/shutters (they are now connected to modbus I/O, one output for open, one output for close).
I've also tested this with Son…
-
### What happened?
Home Assistant is displaying the errors below, informing that the entity values must be within a range.
It turns out that when I set these values to within the range, eith…
-
### What happened?
Hi, I just installed this thermostat and its not really working as expected because when I set the Local temperature calibration to -1 after a random amoun of time it sets its Valu…
-
### The problem
As soon my devices reached ~99d10h uptime:
* they can't go over - continue reporting same uptime for an hours;
* they start to work strange - stop reporting measurements, stop react…
-
### What happened?
MOES UFO-R11 reported low battery. I did change battery two times, with a 1 week interval. However, battery level is "stuck" as low battery.
### What did you expect to happen?
Ba…
-
I'm running the Home Assistant App on my umbrel on a raspberry pi and it works great.
However, in the Home Assistant community it's pretty common to add a little USB dongle (not a storage medium) to …
-
### What happened?
Looking at the logs I see that the otherwise awesome SONOFF SNZB-02D T&H w/ display, does an OTA check (genOta commandQueryNextImageRequest) every 5mins which will really drain the…
-
### What happened?
Hi there, I'm trying to add support to the unsupported device on z2m;
https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html#_2-creating-the-external-…