-
Hi,
I am trying to simulate latest Linux with spike on Ubuntu 16.04. But it seems that the device tree cannot be initialized successfully.
The version of related repositories as listed as belows…
-
I’m using the feather_nrf52840_express-en_US-4.0.0-beta.5.uf2. I’m trying to use the displayio library with an external ST7735 LCD display. I’m using the code from https://github.com/adafruit/Adafru…
-
PIO Core Call Error: "Library Storage: C:\\Users\\Girs\\Documents\\PlatformIO\\Projects\\Converter_HZ_Stm32\\.piolibdeps\r\nUpdating ssd1306 @ 1.7.17 [1.7.18]\r\r\nUnin…
-
I tried to use your library to write text to a 96x96 OLED display. The problem was the text color on the display was different than what I had specified in the code, also the text was mirrored. I th…
-
The system is:
Machine model: Raspberry Pi Zero Rev 1.3
Linux version 4.14.83+ (dom@dom-XPS-13-9370) - some Raspbian.
Display started to work in a 128x98 SSD1351 configuration. I even changed th…
-
Hello!
(sorry for my bad english)
First, thanks for this awesome driver!
I'm trying it with an official Waveshare 3.5 inch LCD IPS (B) display (not a clone), which is supported out of the box…
-
So great that you're working on the I2C, thanks! I'm trying to get this to work together with @jamwaffles's `ssd1306` crate, but... no luck so far. Seeing as you have your own OLED driver (is I2C work…
-
Please provide the following information:
## library version 9d74c90
## LCD display type 1.5 inch 128x128 ssd1351
## Steps to reproduce the issue N/A
## Expected behavior N/A
## Actual behav…
-
Hallo,
I'm using the ESP32(Lolin32) Board. I have tested one OLED with SSD1351_18x128x128_FT_HWSPI, and there are 3 or 4 pixels that are not drawn with the right value. I think, that are the first pi…
-
Board|MCU|State|To-Do
-|-|-|-
8-Bit AVR boards, RAMPS, etc.|Arduino AVR|💚good|
Due, RAMPS FD (v2.A!), etc.|SAM3X8E|💚good|
Duet Wifi + X5|SAM3X8E|❓unknown|E3D Toolchanger on hand
Duet 2 Maestro|SA…