-
Hi,
is it possible to send a lora payload from a T-Beam and receive it from a LoRa32 SX1276 OLED (v2) ? I if follow those two tutorials:
https://randomnerdtutorials.com/ttgo-lora32-sx1276-arduino…
-
The LoRa forwarders container is restarting continuously:
```
Restarting the CE0 pin...
Done
Restarting the RFM95x Module...
./start.sh: line 75: echo: write error: Device or resource busy
Don…
-
Hello there!
I'm also trying to resolve this issue on [the TTN forum](https://www.thethingsnetwork.org/forum/t/sam-r34-lorawan/42447) but here I'm just looking at the BastWAN core aspect.
I rece…
-
**Describe the bug**
Sometimes on ESP32 Boards, your system transmits data during the time another module is already transmitting, the ESP 32 crashes. in my minimal test sketch (only radio), I need t…
-
i have sx1276 ttgo lora, when they close it should be like - 8 or even -15 rssi right?
when i get close i got like rssi -40 or -50 rssi value, is that normal?
i use everything for make it boost…
-
#### Summary
Require a vendor neutral name for use with community devices
#### Why do we need this?
So DIY devices that use the compliant open source stacks like the MCCI LMiC can be select…
-
Hi again,
I am wondering if this module (https://www.tindie.com/products/nicerf/lora1262f30-15w-sx1262-868mhz915mhz-rf-module/) could be used with your ESP32 back pack implementation? Could this mo…
-
This message appeared on several occasions on V1.1 final:
```
2020-03-31T17:04:33.237058540Z [ ] Edge ID: "b827eb02f33a"
2020-03-31T17:04:33.247893977Z [Edge ] Connected to edge mqtt.
2020-03-…
-
Hello,
I run the paxcounters on batteries for outdoor use and I want to know which settings provide low power consumption. I only need to read and send the wifi count every 5-10 minutes. Any recomm…
-
Currently, the CDP only supports ESP32 and is hardcoded to work with the SX1276 LoRa radio. While this system works well so far, we envision the CDP integrating on a large family of devices. We see ot…