-
After using succesfully an OpenIPC Ultimate version from October 2023 for a few months, I tried to "Install update from Github". The installation of `2.4.02.17-ultimate` went fine, with two problems h…
-
**Describe the bug**
When running the USB Mass Storage example with USB Next enabled, connection of a Host results in Zehyr Kernel Panic and System Hold.
Tested with STM32U585 on ST BU585-IOT02A b…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi, thanks for this magic project!
My Panasonic AC (NKE series), CZ-TAC interface, use the [A75C3887 remote.](https://www.electrohogar.net/62-thickbox_default/cwa75c3887-a75c3887-a75c4179.jpg)
W…
-
Because of WCOS and newer guidelines from Microsoft, drivers should now be isolated.
An isolated driver is a driver whose files are only present in driverstore, and whose registry entries are loaded …
-
### Related area
HITL test
### Hardware specification
DCD only for the moment
### Is your feature request related to a problem?
I'm going to add more boards into the loop, currently planned:
- L…
-
I've followed the process (have a 3080 Ti), but when connecting in, the VM, in windows display settings, is locked to 1024x768. Even after using the update drivers ps1 file, and using the file to gath…
-
Im trying to install windows 10 Pro Build 18956, but in GUI my sdcard not showing up, and in cmd line `"C:\Users\Administrador\Downloads\WOA.Deployer\WoaDeployer.exe" deploy --disk 2 --wim install.wim…
-
at32f413
```
Cherryuf2/src/msc_desc.c:38:274: error:
macro "MSC_DESCRIPTOR_INIT" requires 5 arguments, but only 4 given
38 | 1, USB_CONFIG_BUS_POWERED, USBD_MAX_POWER), MSC_DESCRIPTOR_INIT(0x0…
-
## UPDATE
Check latest comment.
I found the problem. Previously for some reason I set `CONFIG_TINYUSB_CDC_COUNT` to 2 and then enable the MSC. Now if I set `CONFIG_TINYUSB_CDC_COUNT` to 1 and MS…