-
Let's continue the discussion here. I want to help with this project.
* Firstly, I want to create a PrettyScope / CPU Scope hybrid, so if you have a compatible GPU you can use it, and if you don't…
-
The PSLab is capable of outputting PWM signals at frequencies up to 8 MHz. However, the GUI currently does not go above 5 kHz. The frequency slider in the waveform generator view should go to 8 MHz fo…
-
- https://www.picotech.com/library/oscilloscopes/arbitrary-waveform-generator-awg
- https://www.picoauto.com/library/waveform-library
- https://github.com/picotech
-
Hi,
I am trying to use the same parameters to run a simulation with two different methods but not getting the same result.
The first method is where I add the drives from params:
```python
n…
-
just for info
i just started to get serious about implementing a particle system. each particle has a mass and a charge and a current position and velocity. at each iteration, the forces on each pa…
-
**Description**
Librosa typically operates on one-dimensional, one-channel signals whose shape is `(n_samples,)`. In some cases, stereo signals are accepted in "time-major" format, e.g. of shape `(2…
-
### Basic Infos
- [X] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [X] I have read the documentation at [readthedocs](https://arduin…
Gei0r updated
3 years ago
-
Hi,
first of all thanks for the great work on the AutoVC system.
I have tried to replicate the system, but could not achieve to achieve nearly the same quality as the pre-trained system.
I use the …
kvnsq updated
3 years ago
-
- KOReader version: koreader-nightly-20160702 koreader-kobo-arm-linux-gnueabihf-v2015.11-507-gef260f0.zip
- Device: Kobo N905
#### Issue
My Kobo N905 is on firmware 3.19.5761. Whenever I start the la…
dwl99 updated
2 years ago
-
I found no reference to whether generating LaTeX/PDF output is either supported or planned.