-
Dear API Users,
WaterNSW has introduced another API service that will be providing richer hydrometric data for surface water and groundwater stations across all NSW water sources.
As t…
-
### The problem
Recent change (https://github.com/home-assistant/core/pull/119922) has removed ability to read forecast via sensor, but now requires to call a service. Unfortunately calling service…
-
It seems that HAL from SEMTECH supports LBT when version is > = 4.1.0, but can AS923 be supported by your board ? (Japan)
4mig4 updated
5 years ago
-
I have been working on a smart irrigation system project for a long time. For this I use soil moisture sensors for the data to receive and a nRF24l01 radio module for communication. And since I have s…
-
First install went well.
2 contact sensors detected and working 100%
1 motion sensor detected but not detecting motion.
...
I had created a full backup just before installing WyzeSense so I went …
-
We run 1 Samsung A5 2027 under LineageOS 18.1 without Gapps and one Fairphone 3 under LOS21. All have Home Assistant App from Android. All devices have a data limit set to 6.5 GB with auto deactivati…
-
Project Name: The People’s Network use in Digital Agriculture Elevator Pitch:Large and small growers alike benefit from sharing ambient weather conditions, air quality, and other environmental data. W…
-
I'd like to point out that I tried many times to attach a .zip, .gz, or .tar file to this post.
I did manage to get github to format this post properly.
```
Ecowitt WS68
Lux, Battery, Wind speed…
-
### PROBLEM DESCRIPTION
The weather card used as a screensaver cannot display anything when connected to HA 2024.4.0b0 due to the removal of the `forecast` attribute for `weather` entities. It …
-
### В чем проблема?
Добрый день.
Обнаружил ещё вот такую штуку:
Значение сенсора `sensor.yandex_pogoda_wind_bearing`, по всей видимости, представляет собой угол в градусах...
Однако, видимо, **зна…