-
Hi,
I am running the driver in AP mode using VHT configuration, I want to achieve 867 Mbps for research purpose.
Here is my `hostapd.conf`
```
interface=wlxd03745a92803
bridge=br0
driver=nl8…
gteca updated
3 years ago
-
TODOs for next release:
- [x] update pip
- [x] rev most of our packages (watch out for breakage)
- [x] investigate Jupyterlab update to 3.0 (does it break backend demo?)
- [x] ~~amgeo install (#68…
-
ubus call hostapd.wlan0 rrm_beacon_req accepts 3 modes 0 (BEACON_REPORT_MODE_PASSIVE), 1 (BEACON_REPORT_MODE_ACTIVE) and 2 (BEACON_REPORT_MODE_TABLE).
Which mode is the correct one for dawn?
Te…
MrWGT updated
3 years ago
-
List of broken ones for armhf marked ‘-‘
see here:
https://github.com/bareboat-necessities/opencpn-plugins-bundle/blob/main/plugins-armhf-compat-5_6_0.txt
-
1. Latest firmware v0.5280_Perf
2. Connecting wifi works first time. But then seems IoT hub is not responding properly. So reconnect..However devices go stealth: connecting IoT hub (green 3x blinks) …
-
Hi,
it might be strange but I have noticed with the latest version of the driver a strange behavior. I check the txpower power from time to time and I notice that it changes from 20 up to 23 dBm. I …
-
Courses derived from electronic charts routing are supposedly true bearings,
while magnetic bearings are required to steer by compass.
Determining magnetic deviation (VAR) as well as maintaining
…
-
Setting ` vht_oper_chwidth=1` (to get 80 MHz channels) or any other VHT channel widths results in an odd error message:
```
Mode: IEEE 802.11a Channel: 44 Frequency: 5220 MHz
DFS chan_idx seems…
-
Using linux with current master the pluginmanager(.cpp) is loading the same PI multiple times if running in portable mode. The directory search string contains multiple dirs, and if there are multipl…
-
Hello,
Thank you for your jobs !
the experimental branch solved my precedent issue.
But i have one major issue:
I kill all with:
sudo airmon-ng check kill (twice)
but i have the error w…