-
Using a 8852ce module on Ubuntu 22.04 LTS I am able to capture frames on most 2.4 GHz channels when in monitor mode. Low power mode is disabled.
```
...
[98869.471001] rtw89_8852ce 0000:02:00.0: …
grutz updated
5 months ago
-
```
What steps will reproduce the problem?
1. Connect with 5ghz wifi
2. Start streaming video
3. After approx 10min router stop fw data on 5ghz interface
What is the expected output? What do you see …
-
My Router supports WPA2 / WPA3 but this will not work as described in the Manual trust me i have tryed it many times to get up working. With some modifications on my router i can configure WEP. But is…
-
Just looking at the bug reports here and in the OpenWRT defects repository, it is clear that for various mt76 chipsets the TX power is simply not working.
I myself am experimenting two issues with …
dmsza updated
1 month ago
-
```
What steps will reproduce the problem?
1. Connect with 5ghz wifi
2. Start streaming video
3. After approx 10min router stop fw data on 5ghz interface
What is the expected output? What do you see …
-
I noticed flying carpet seems to be relying on a 2.4Ghz hotspot limiting transfers speeds. Could their be an option to use 5ghz?
-
I'm trying to setup ad-hoc mode with 5GHz band but seems it's not working. I tested on 2.4 GHz and it works just fine.
I use:
```
sudo modprobe 8812au rtw_channel=50
sudo ifconfig wlan0 down; sud…
-
```
What steps will reproduce the problem?
1. Connect with 5ghz wifi
2. Start streaming video
3. After approx 10min router stop fw data on 5ghz interface
What is the expected output? What do you see …
-
Device Model: Technicolor TG789VAC v2
Gui Version: 9.5.4
Description of problem: 5GHz wifi analyzer doesn't find anything and stays empty, but 2.4 analyzer works well. Both 2.4 and 5 GHz access po…
-
Thankyou for this amazing tool! I'm working on frame injection on 160MHz bandwidth using Nexus6P.
When setting the 5GHz channels (using command "nexutil -k" )，it worked well on channel149, 153, 157,…