-
I have 2 that have been running for months. Today I went to the System menu and get The server encountered an internal error and was unable to complete your request. Either the server is overloaded or…
-
I have an issue that the image capture won't restart as night falls. I have seen this issue occur over many nights recently, and I have had to manually intervene.
The log shows the nightfall transi…
-
Pi HQ Camera 4056x3040 resolution; binned is 2028x1520
So I have the PiCapture.cpp "fix" in for binning (see [https://github.com/AllskyTeam/allsky/discussions/1685#discussioncomment-9073792](url)) …
-
I receive the following exception when trying to use the IMX296 global shutter module.
I assume that because the IMX296 is monochrome, it does not have the INDI_RAW control.
Sorry for the format…
-
Hi,
I have moved the server to run remotely with regards to the indiserver. It's a 100 mbit connection with low latency (10-20 ms) and they are bridged in the form that the remote RaspberryPi with …
-
During installation and whenever Allsky starts, it should check if the current camera is supported, and tell the user. It should also tell the user how to request the camera be supported.
-
I did attempt to install according to the setup directions (client version on the pi - the MQTT broker server is already running elswhere): https://github.com/markmac99/ukmon-pitools/wiki/Monitoring_w…
-
### Discussed in https://github.com/aaronwmorris/indi-allsky/discussions/1128
Originally posted by **jproehl** February 9, 2024
I've run into a problem using darks.py. I set my Gain at 150 an…
-
Support Arducam Pivariety IMX462
[IMX462.txt](https://github.com/thomasjacquin/allsky/files/13630398/IMX462.txt)
-
One of our Allsky users has an RPi HQ camera that occasionally produces the error below. Sometimes it produces 4 in a row, at which point our software stops. Any ideas on how to debug this?
Befor…