-
**Describe the bug**
The white control in RGBW2 entities is gone, which means you can no longer control it from HA.
I've read this may be related to a change in 2022.9. https://www.reddit.com/r/h…
-
**Describe the bug**
Hi
thanks for great script !
I have Shelly TRV, which I've configured and everything works except Valve position entity. Its unavailbe.
. Those are configured as buttons. The remaining inputs have nothing connected and…
mignz updated
2 years ago
-
With Shelly1 Plus firmware 0.10.3, using mqtt-discovery.js and commands works through mqtt, but status never arrives about changed state.
Replaced
Shelly.addEventHandler(function (ev_data) { ...…
-
I have change de Device name in the Shelly Device/app
The name are showing in Logfile but the name is not change in Homekit. He lists it as "Switch 1"
In the accessories tab it also indicates it wro…
-
**Describe the bug**
Shelly Motion not detected
**Expected behavior**
when the detect automation is run, my Shelly Motion is added
**Versions:**
- Home Assistant: Home Assistant Core 202…
-
### Shelly device
Shelly1PM
### Protocol (CoAP / MQTT)
CoAP
### The problem
I'm using the Shelly1PM to open a water valve. For security reasons, I've set the Auto-Off value to 20sec and used a sc…
-
**Describe the bug**
Shelly Plus 1 PM is missing Information for Temp, Voltage, Current.
The Information is shown as "unknown" even if the information is available in MQTT.
**Expected beha…
-
I'm running HA 2022-11 and powercalc 1.0.1.
Since this morning, powercalc identifies Shelly Plug S but does not allow for their configuration. See below screenshot.
Pwer outlet are not listed in you…
-
### The problem
With Shelly TRV firmware 2.1.4 the target temperature can be set in 0.5 degree temp steps instead of 1 degree steps. The Shelly integration of HA currently only supports target_temp…