-
Hey guys,
I work on hobby projects mostly and got the Pulse sensor to do some biomedical hacks.
While the example works on the older Arduino's(Mega,UNO), The code throws a lot of errors with newer a…
-
## Arduino / Genuino platforms currently in production
Name | Processor | `SERIAL_PORT_HARDWARE_OPEN` | `USBCON` | Definition
------------|---------------|---------------------------…
-
Had to run this before I could get the upgrade going `git config --global --add safe.directory /home/brewpi`
At the end of the upgrade it asked me if I wanted to flash my controller, I chose 'Y' an…
-
This simple test of the PM->RCAUSE.bit.WDT bit cause an error in a CMSIS Macro... Other bits in RCAUSE work fine...
Arduino 1.85
SAMD21 1.6.19
CMSIS-Atmel 1.1.0
~~~
void setup() {
if (PM…
-
```
What steps will reproduce the problem?
1.If byte or integer variables are printed with serial.print or serial.println
with the HEX output format option leading zeroes are not printed:
byte readin…
-
```
What steps will reproduce the problem?
1.If byte or integer variables are printed with serial.print or serial.println
with the HEX output format option leading zeroes are not printed:
byte readin…
-
Hello
I have the follow verbose
/tmp/build8120234896648706583.tmp/FreeRTOS/port.c.o: In function `xPortStartScheduler':
/media/alejo/320efc47-e26f-41b6-ba4e-6fa1069d77fb/alejo/arduinos/arduino-1.6.4…
-
I was trying to test #127 locally and it deleted the whole git repo where I was working. Nothing was lost as I didn't have any un-pushed work, but, OUCH.
I'm guessing it was because one step was `…
-
```
What steps will reproduce the problem?
1.If byte or integer variables are printed with serial.print or serial.println
with the HEX output format option leading zeroes are not printed:
byte readin…
-
```
What steps will reproduce the problem?
1.If byte or integer variables are printed with serial.print or serial.println
with the HEX output format option leading zeroes are not printed:
byte readin…