-
### Board
ESP32-C6
### Device Description
My own board
### Hardware Configuration
NO
### Version
v3.0.2
### IDE Name
ArduinoIDE
### Operating System
Windows
### Flash frequency
80
### PS…
-
When I run the following code snippet, i get this warning. Should I be afraid of it if I want to use images in the future? Nothing changes when I include ``.
```cpp
#include
#include
#include …
-
I've made some progress. There is a separate arduino-pico core which isn’t officially (yet) supported by platformIO. They have some instructions for setting it up here:
https://arduino-pico.readt…
-
### Discussed in https://github.com/hsaturn/TinyMqtt/discussions/93
Originally posted by **DatutaX** September 9, 2023
i try to compile the simple-broker with Arduino ide 2.2.1 but get error.…
-
originally work is normal.
i keep on compile .
in development.
than Error.
i not uninstall any soft.
i try ArduinoIDE. it can work.
```
[Build] C:/Users/Charlotte/OneDrive/Git Repository/BT…
-
Hi all,
can you assist me in sorting out access problems from the flatpack installation (Arduino IDE 1.8.13 - Debian 10 GNU/Linux)? The IDE tries to use the critical file 'crtatmega328pb.o' located…
-
The dashboard and the OTA update do not work in both cases since the update V4.0.
With V3.9 it works perfectly.
Ping and mining work perfectly.
The dashboard and the OTA get the error “Connecti…
-
**Many thanks to Tobozo for setting up this new panel for me.**
Running the code below gives this error in `tft.init();` -
` E (1006) spi_master: spi_master_init_driver(236): invalid core id`
Using…
-
I use Arduino NANO Esp32 Board
I've selected COM3 port from Arduino Ide
I've installed dualsense library and suggested host shield 2.0 library
After Paste and verify the example code, the result …
-
### Board
ESP32-D0WDQ5
### Device Description
No hardware, directly connected to Mac for power and flashing.
### Hardware Configuration
No hardware, directly connected to Mac for power and flash…