-
I have a few devices that don't seem to respect the 802.11v signal to move to another AP. I thought that setting `eval_probe_req`, `eval_auth_req`, `eval_assoc_req` to 1 would have it properly kick th…
rany2 updated
10 months ago
-
It would be a good additional to have a new dialog that import data from tables in databases- Sql, Acess etc....
-
Hi,
I've been sitting on the older "pre-basics station" bits for the last 5 years or so and I am now starting to upgrade a few of my deployments to the new bits. I am replacing my old gateway wh…
-
### Description
As far as I searched the discussions and issues, I couldn't find any attempt to implement an interface to the [esp32-camera](https://github.com/espressif/esp32-camera) driver in the…
-
I've successfully built openwrt 18.06.01 for the dlan-pro-1200-ac with dlan-openwrt and the MT2675 PIB & NVM driver from firmware.QCA9882-v2.2.0_2018-07-26.dv and installed this on the white non-pro v…
-
### Summary
A rogue gateway is able to supply positive RSSI values. (greather than zero)
This means it is selected for downlink path over any other gateway.
### Steps to Reproduce
1. Send positi…
-
I apologize if this isn't the right place for a post like this- if it is an issue and you know where might be better suited, please let me know. Thanks!
As a part of my university research I am des…
-
This issue should be used as main chat for active contributors. Let me know your ideas and what you want to do. First idea of teodoryantcheff was documented in https://github.com/Rimco/OSPy/wiki/API-i…
Rimco updated
3 years ago
-
I would like your help to debug an issue.
I have Semtech SX1302CxxxGW1 Corecell Gateway. I was setting up the Lora Basic station gateway in the SX1302CxxxGW1. I have implemented Lora Basic Station …
-
The dragon won't dismount player at correct height,
it dismount player at about 3 block height to the ground.
Result in everyone got falling damage.
And if I replace station block as water,…