-
## First tasks:
- [x] Add bluez5 into Venus
- [x] Configure & test driver on the Beaglebone Enhanced
- [x] Enable bluetooth modules in the kernels
## Requirements
First a short reminder, sinc…
-
the device reboots fine though....
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Unmounting remote filesystems...
Deactivating swap...
Unmounting local files…
-
I'm opening this issue to help track the progress of getting Docker up and running on a RaspberryPi.
I'll update it with my progress.
If you are interested in helping, let me know here.
-
Hi,
in the wiki you wrote something about a custom BBE that you built in corporation with Sancloud.
I'm interested in a similar thing. Can I get in touch with someone of you regarding this?
BG, Tho…
-
On the current released firmware on the CCGX (= Danny), special care has been taken to keep the watchdog armed during a reboot. To make sure that the device does not get stuck during a reboot.
See…
-
Hi,
with the rtl8723bu driver loaded, my device won't reboot anymore. Its 100% reproducible. And solved by booting without loading the driver.
system log output is:
```
root@beaglebone:~# reboot
…
-
besides the main issue, two others:
- and no reset afterwards: watchdog not yet running ok?
- and shouldn't the kernel initiate reboot after panicking?
```
root@beaglebone:~# [12768.419617] usb 1-1: …
-
Hello, It's me again.
Thanks again for your programming the device driver.
I got another problem here.
I compiled the driver from the newest source code, and I found two interface:
```
[ 759.88…
-
Tests were done on a beagleboneblack, not connected to internet / ntp.
After setting the hwclock to some time in the past, the time is miraculously restored again during boot.
Which is normally not …
-
Observed while deploying an app on the beaglebone black:
root@beaglebone:~# [ 533.797044] mmcqd/1: page allocation failure: order:2, mode:0x2204020
[ 533.803549] CPU: 0 PID: 94 Comm: mmcqd/1 Not ta…