-
**Describe the bug**
After I reboot my HA, my openBK device reconnects to the MQTT, but the entities remain disabled
Possibly related to #15 .
The chip insi…
-
Hi,
I tried to flash the device:
[?] Select your custom firmware file for BK7231T chip: ESPHome-Kickstart-v23.08.29_bk7231t_app.ota.ug.bin
► ESPHome-Kickstart-v23.08.29_bk7231t_app.ota.ug.bin
…
-
Hello there, this issue is similar to the already closed issue #497 .
I am trying to flash a Hama GU10 5.5W RGB bulb.
I checked the firmware in the SmartLife App: 1.1.2
Therefore I am using foll…
-
**Describe the problem you have/What new integration you would like**
Basically this feature of Tasmota: https://tasmota.github.io/docs/Lights/#virtual-ct. I just got some Teckin SB60 bulbs, and …
-
I'm working with ESPHome on an RGB bulb - and if I interact with the bulb for a bit, scrubbing through colours etc, the connection will eventually drop and not come back up without a power cycle.
S…
lmcd updated
11 months ago
-
Hey
I have a outdoor Arlec Grid Connect plug (pc44ha). I have successfully flashed the kickstart esp home on it (it was using 1.3.5 firmware as the arlec pc191ha). This is the plug - https://www.bu…
-
I have been struggling with this for quite sometime. Many posts exists concerning ESPHome WiFi connection issues resulting in "EOF received" and "Connection reset by peer" messages in HA logs when usi…
-
Hi,
I have a device that I will like to flash with OpenBK firmware.
On my Ubuntu I have downloaded ltchiptool and did:
`python3 -m ltchiptool uf2 write -b cb2s -o openbkt.uf2 OpenBK7231N_1.17.…
-
### Description
It's seems quite a few smart devices are moving away from ESP controllers and use BK7231 chips instead. Would there likely be espurna style firmware in the future?
### Solution
The …