-
X9S 1295 用18版本,安装软件包overylay空间不够应该怎么办?
-
firstboot.service is not working. There is no user in the system.
Possible solution: when creating rootfs you need to delete /etc/machine-id
-
### Describe the bug
I have a Xiaomi AX3000T and the snapshots have been broken for about 2-3 days. The update process runs perfectly, but after the restart the end devices are no longer assigned a…
-
buildroot no longer supports python2 building - this requires the host machine to install python2 to make.sh.
Can you please migrate to python3 support ?
That would simplify issues reported agai…
-
when terminal run : sudo reboot
the nanopi r2s shutdown but not boot success
![屏幕截图 2021-04-11 195447](https://user-images.githubusercontent.com/635578/114305217-b21a2180-9b09-11eb-93cc-1190dc…
-
~~Did you ever try out to specify the upper 1.3V dvfs operating points the 'usual' way: `11300` vs. `1100`?~~
dvfs_table {
compatible = "allwinner,dvfs_table";
max_freq = ;
min_freq = ;
…
-
For the RISC-V Maixduino board I will need to first build U-Boot and then OpenSBI passing U-Boot as payload:
```
prepare:
test -d opensbi || git clone -v \
https://github.com/riscv/opensbi.git…
-
Hello ,
I am using RcarE3 platform.
And for convenience , Project need to change arm-trusted-firmware to the win OS to compile due to all project code compile under win system.
So could you shared…
-
Hi,
I notice in ATF generic GIC code (drivers/arm/gic/arm_gic.c : arm_gic_get_pending_interrupt_type) that interrupt is considered S-EL1 type if id is strictly below 1022 (which may be actually st…
-
branch: khadas-vims-pie
rank0+1 are initialized incorrectly (probably bug in BL2 binary)
```
GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:0;READ:0;0.0;CHK:0;
no sdio …