-
Hi,
Please add a driver to support UCS1912S,
as in the post https://www.elektroda.com/rtvforum/topic3930834.html
-
Currently, for platforms other than BK, C files need to be added to the makefile.
We need some help from someone actively using the other platforms to confirm that if drivers/DRV_SSDP.c is added, a…
-
I'm in the process of converting some of my grow lights to BL602-based RGB LED controllers. What problem I'm currently running into is that I need to be able to control each PWM channel like it is it'…
4pack updated
10 months ago
-
Does anyone have a copy of the Magichome Wifi LED controller's firmware based on BL602? I dumped mine using blflash but didn't notice that by default it is only dumping the 1st MB of memory and as far…
-
Let's take this code:
```c
void main() {
struct bflb_device_s * dev = bflb_device_get_by_name("gpio");
uint32_t reg_base = dev->reg_base;
printf("GPIO reg base: %08X\n", reg_base);
…
-
I could not find much information on what the CKS is but the base address defined in the svd overlaps with UART0 at 0x4000a000. What is the correct base address for this?
-
Trying to flash anything and I get this error
========= eflash loader config =========
=========c:\source\doiting_bl\bl_iot_sdk\tools\flash_tool\bl602\device_tree/bl_factory_params_iotkita_40m.dts…
-
**Describe the bug**
Hi, I have a few devices flushed via UART cable to 1.14.104 and deployed them in my house.
Now, I realize that the OTA update seem not to work with this release. Could this be?
…
-
For Windows there is BLFlashCube and for Linux, there's a binary of flash_build, but not really the source. This is problematic for developers on MacOS (with two processor types), Raspberry Pi, or dev…
-
Hello,
I ordered two WB2-12F development boards, hoping I would be able to flash them with OpenBeken.
This is the board: https://de.aliexpress.com/item/1005004911487557.html
Unfortunately I did …