-
Hello @dorvan , @Doenec ,
I am @clearemc we discussed about doing a first revision oriented to Electromagnetic Compatibility (EMC).
First of all, congratulations for your work and for your effort…
-
Would you anticipate any issues with using a TMC2209 driver in place of the DRV8825? It should be quieter? https://3dwork.io/en/tmc-drivers/
samuk updated
2 years ago
-
Hi guys, i seen that you provide only repositories for armhf and arm64 builds.
Can you provide x86_64 builds too?
Thanks :-)
-
i was wondering if it is also possible to read canbus data with this shield not connected to the odb2 but with a contactless clip (eg cancrocodile) on the C-H and C-L cable?
-
For [CAN-BUS_Shield_V2.0](http://wiki.seeedstudio.com/CAN-BUS_Shield_V2.0/), they change cs pin 10 to pin 9.
So you need to change this line:
https://github.com/latonita/arduino-canbus-monitor/blob/…
-
Hello again
At the end yesteday i could connect the Arduino + CAN Bus shield to my Mercedes W203. As I have only one shield, I have made a bridge between pin 10 and pin 4 under the shield. Pin 10 is…
-
Help!! I have two Sparkfun CanBus shields and both work great on Uno, nano, etc. But when I try to compile on a Due, I get this error:
Canbus.cpp:16:20: fatal error: avr/io.h: No such file or …
-
Arduino IDE Version: **1.8.5**
ELMduino Library Version: **2.0.11** (Latest at the time of opening this issue)
ESP32 Build Tools Version: **1.0.4** (Latest at the time of opening this issue)
ESP32 …
-
Suggest fill in some details on hardware interfacing?
How do you get at the canbus?
What chipset are you using?
etc
csloz updated
5 years ago
-
Neil,
Im using the library with an Arduino Uno and a SparkFun CanBus shield. Im seeing two different things and I wonder if you would have some feedback:
1.) CAN.available() always returns 0 f…